Research Publications

Research Publications 2016

Dillip Kumar Biswal, Biswajit Nayak,(2016), Analysis of Time Dependent Bending Response of Ag-IPMC Actuator, Procedia Engineering, Vol.144, pp. 600-606.
Sandeep Das, Biswajit Nayak, Saroj Kumar Sarangi, Dillip Kumar Biswal, (2016), Condition monitoring of robust damage of cantilever shaft using experimental and adaptive neuro-fuzzy inference system (ANFIS), Procedia Engineering, Vol.144, pp. 328-335.
Prasheet Mishra, D.V.N.Lakshmi,A.pattnaik " Biodiesel production form Karanj and Soybean from a novel process and its performance analysis on C.I.Engine" Proceedings of All India Seminar on Recent Trends in Mechanical Engineering. Organized by Institute of Engineers,9-10 Jan 2016.
D.V.N.Lakshmi, S. S. Mohapatra, H. C.Das " An Experimental Study on Natural Convection Biomass Dryer with Different Sensible Heat Storage Materials " Applied Mechanics and Materials, ISSN: 1662-7482, Vol. 852, pp 707-711.

Research Publications 2015

D.R.Patra, I.S.Rout, "Parametric Optimization of WEDM parameters on EN 31 steel for lower surface roughness using taguchi method",International Organization of Scientific Research-Journal of Mechanical and Civil Engineering, e-ISSN: 2278-1684, p-ISSN: 2320-334X, Volume 13, Issue 1 Ver. VI, Jan-Feb 2015, PP 21-26.
I.S.Rout, J.N.Biswal, B.P.Mishra, "Experimental Investigation on the Cutting Forces of a Single Point Cutting Tool over Dry Turning Operation",International Advanced Research Journal in Science, Engineering and Technology, ISSN (o):2393-8021,ISSN (p):2394-1588,July 2015,Vol2,Issue7,PP 18-24.
L., Shen, K.Muduli and A. Barve,(2015)“Developing a Sustainable Development Framework in the Context of Indian Mining Industries: AHP Approach”, Resources Policy,Vol.46,No.1, pp. 15-26. Impact factor-2.05.
Prajna Mohanty, Smruti Snigdha Patro ,"Processing and Characterization of PEEK with CKP Particles: Use of Industrial Waste in Composite Making" International Advanced Research Journal in Science, Engineering and Technology , ISSN (Online) 2393-8021, ISSN (Print) 2394-1588 ,Vol. 2, Issue 5, May 2015 .
Smruti Snigdha Patro, Prajna Mohanty, Banishree Pradhan ,S.C.mishra ,“Study of Machining Parameters by Pure Copper and Brass Powder Metallurgy Tool Electrode in EDM” Journal of Modern Chemistry & Chemical Technology, ISSN: 2229-6999(online), ISSN: 2321-5208(print) Volume 6, Issue 2 , Aug 2015.
D.V.N.lakshmi,S.S.Mohapatra, A.satheesh,H.Das.” Design and development of V grooved natural convection solar air heater for Odisha”, Applied Mechanics and Materials V0ls-813-814 (2015) pp-668-673.
K. Muduli and A. Barve, (2015)“Analysis of Critical Activities for GSCM Implementation in Mining Supply Chains in India Using Fuzzy Analytical Hierarchy Process” International Journal of Business Excellence,Vol. 8, No. 6, pp.767-797.
G.Kannan, K.Muduli, K.Devika, A.Barve,(2015) Investigation of influential strength of factors on GSCM adoption in mining industries operating in India, Resources Conservation and Recycling, Vol.107, pp.185-194,Impact factor:-2.564
K.Muduli, A.Barve, S. Tripathy, J.N. Biswal,(2015) Green Practices Adopted by the Mining Supply Chains in India: A Case Study, International Journal of Environment and Sustainable Development(accepted).
K.Muduli, J.N. Biswal, S. Satapathy, A.Barve,S. Tripathy,(2016) Investigation of Influential Factors of Green Supply Chain Management in Indian Mining Industries: An Empirical Study, International Journal of Business Excellence(accepted).
K.Muduli, J.N. Biswal, S.Tripathy and A.Barve (2014), “Empirical Analysis of Success Factors of Green Supply Chain Management in the Context of Indian Mining Industries”, International Conference on Multidisciplinary Approaches in Business Management & Sustainability, BIMTECH, Bhubaneswar, 28-29 November.
K.Muduli, J.N. Biswal, S. Satapathy, A.Barve and S.Tripathy, (2015), Best Practices of Green Supply Chain Management: Indian Mining Industry Cases, International Business Research Conference, IMI Bhubaneswar, 6-7 February, 2015.
K.Muduli, D. Yadav, J.N. Biswal, T.K.Panda, (2015), Waste Management and Competitive Advantage: A case of Health Care Establishments in India , 1st International Seminar on Sustaining Competitive Advantage in Service Sector (SUCAS 2015), SOA University, Bhubaneswar,15 - 16 May 2015.
S. Satapathy J.N. Biswal, K.Muduli,(2016), Sustainable Supply Chain Management in Context of Indian Thermal Power sectors, XIX Annual Conference of the Society of Operations Management, Indian Institute of Management Calcutta (IIM C), 11 - 13, December 2015.
J.N. Biswal, S. Satapathy, K.Muduli, (2016), Priortizing Sustainable Supply Chain Management in Thermal Power Sectors - An Indian Perspective, International Conference on Engineering and Material Sciences, Jaipur National University, Jaipur, India, 17-19, March, 2016.(Accepted).
Pragnya Pramit Choudhury, jagadish Baral, Jitendra Biswal, Suchismita Satapathy, (2015) Qfd Approach for Framing Ohs Practice In Different Industries In India For Employee Satisfaction, Glacier Journal Of Scientific Research.
D.R.Patra, I.S.Rout, M.Sahoo, "Optimization of WEDM parameters using Taguchi method for higher material removal rate on EN31 steel", International Journal of Engineering Research and Applications, ISSN : 2248-9622,June 2015, Vol 5, Issue 6, ( Part-4) ,PP 57-62.
I.S.Rout, J.N.Biswal, B.P.Mishra, "Experimental Investigation on the Cutting Forces of a Single Point Cutting Tool over Dry Turning Operation",International Advanced Research Journal in Science, Engineering and Technology, ISSN (o):2393-8021,ISSN (p):2394-1588,July 2015,Vol2,Issue7,PP 18-24.
J.N. Biswal, K.Muduli, S. Satapathy, T.K.Panda, (2016) “Sustainability Issues in Supply Chains of Indian Thermal Power Industries”, All India Seminar on Recent Trends in Mechanical Engineering (RTME-2016), 9th-10th January, 2016, The Institution of Engineers (India), Odisha State Centre, Bhubaneswar.

Research Publications 2014

H. Joardar, G. Sutradhar, N.S.Das, S. Singh, "Application of Response Surface Methodology for Determining Cutting Force Model in Turning of LM6/SiCP Metal Matrix Composite", Measurement, Elsevier, Vol. 47, 2014, pp. 452-464.
I.S.Rout, D.R.Patra, S.S.Patro, M.Pradhan, "Implementation of Six Sigma Using DMAIC Methodology in Small Scale Industries for Performance Improvement", International Journal of Modern Engineering Research, ISSN 2249–6645, March 2014, Vol-4, Issue -3, PP-44-49.
I.S.Rout, D.R.Patra, S.S.Padhi, J.N.Biswal, T.K.Panda, "Design and Fabrication of Motorized Automated Object Lifting Jack", IOSR Journal of Engineering, ISSN (e): 2250-3021, ISSN (p): 2278-8719, Vol. 4, Issue-5, May 2014, Version 5, PP- 6-12.
I.S.Rout, K.Panigrahi, B.Pradhan, "Effect of Pressure on Material Removal Rate on Glass Using Abrasive Jet Machining", International Journal of Engineering Research & Technology (IJERT), ISSN No. 2278-0181, Vol. 3 Issue 4, April – 2014, PP- 483-487.
S.Ghosh, N.Sahoo et.al, "Anomalous Subsurface Thermal Behaviour in Tissue Mimics upon near infrared irradiation mediated photo thermal therapy", Journal of Biomedical Nanotechnology, vol.10 (3), 405-414, 2014.
N.Sahoo, S.Ghost et.al, "Investigation of non-Fourier effects in bio-tissues during laser assisted photo thermal therapy", International Journal of Thermal Science, vol.76 , 208-220, 2014.
Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "Design of Backward Swept Turbine Wheel for Cryogenic Turboexpander", Journal of Engineering Science and Technology, V9(4), 2014.
Rout, S. K.,Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "Numerical Study and Analysis of Inertance-Type Pulse Tube Refrigerator", Wseas Transactions On Heat And Mass Transfer, V9, 2014.
I.S.Rout, S.S.Padhi, J.N.Biswal, T.K.Panda, "Optimization of cutting tool material in lathe machine by T-test", International Journal of Modern Engineering Research, ISSN 2249 - 6645, September 2014, Vol 4 Issue 9, PP 32-36.
M.Sahoo, D.R.Patra, I.S.Rout, "Fabrication and Study of Titanium Diboride Powder and Aluminium Titanium Alloy Composite", International Journal of Advanced Research Trends in Engineering and Technology, ISSN(Print):2394-3777,ISSN(Online):2394-3785, December 2014, Vol. 1, Issue 4, PP 57-65.

Research Publications 2013

Mishra, S. R., Chaterjee, S., Mohanty, M. K., Senapati, M. R. and Panigrahi, N., 2013, Biodiesel Production from Simarouba glauca Oil using CaO and KOH Catalysts: A Comparative Study, International Journal of Scientific & Engineering Research 4(12), 147-151.
Chaterjee, S. and Pohit, G., 2013, Dynamics of nonlinearly damped microcantilevers under electrostatic excitation, Proc IMechE Part C: Journal of Mechanical Engineering Science 227(3), 630-646, SAGE.
Chaterjee, S., 2013, Effects of nonlinearities on the dynamics of electrostatic MEMS, Proceedings of the All India Seminar on Recent Advances in Mechanical Engineering, The Institution of Engineers, Odisha, India, 63-71.
Sunita Routray and Tanusree Bera, "Performance of Mineral Separator on Concentration of Heavy Minerals", International Conference on Mineral Processing Technology-2013, pp.268, 10-12 Dec 2013, Abstract Volume, IMMT Bhubaneswar.
Ranjita Swain, Sunita Routray and Rudra Narayan Mohapatra, "Utilization of Fly Ash as a Raw Material for Ceramic Indusrties- A Case Study", International Conference on Mineral Processing Technology-2013, pp.158-159, 10-12 Dec 2013, Abstract Volume, IMMT Bhubaneswar
Sunita Routray and R. Bhima Rao, "Response of beach sands to mineral separator", National conference on Development in Mechanical Engineering-An Impact on Ecology and Enviornment, 9th-10th March, pp.68-74, 2013, Raajdhani Engineering College, Bhubaneswar
Ranjita Swain, Sunita Routray and R. Bhima Rao, "Grindability characterization study on partially laterised khondalite rocks-a buxite mining waste", National conference on Development in Mechanical Engineering-An Impact on Ecology and Enviornment, 9th-10th March, pp.85-90, 2013, Raajdhani Engineering College, Bhubaneswar
Sunita Routray, T. Laxmi and R. Bhima Rao, "Alternate Approaches to Recover Zircon Mineral Sand from Beach Alluvial Placer Deposits and Badland Topography for Industrial Applications", International Journal of Material and Mechanical Engineering, Vol 2(4),pp.80-90, 2013
Sunita Routray and R. Bhima Rao, "Effect of Thermal Shock on Grindability of Zircon for Preparation of Zircon Flour", High Temperature Materials and Processes. Vol 32 (6), pp. 573–579, DOI: 10.1515/htmp-2013-0005, 2013
Sunita Routray and R. Bhima Rao, "Optimization of Some Parameters of Rougher Spiral Concentrator for Preconcentration of Total Heavy Minerals from Beach Sand", World of Metallurgy,-ERZMETALL, 66 (1), pp.5-12, 2013
M.K.Parida, D.P.Ghosh, S.K.Nayak, M.Ukamanal, "A review on microbial fuel cells: Recent advances and perspectives" Proceedings of All India Seminar on Recent Advances in Mechanical Engineering (RAME-2013). The institution of Engineers (India) in collaboration with KIIT University Odisha, organized by Odisha State Centre, BBSR, March 16-17, 2013.
S.K.Nayak, M.K.Parida, D.P. Ghosh, M.Ukamanal, "Characterization and effect of using waste fired working oil as fuel in CI Engine", Proceedings of All India Seminar on Recent Advances in Mechanical Engineering (RAME-2013). The institution of Engineers (India) in collaboration with KIIT University Odisha, organized by Odisha State Centre, BBSR, March 16-17, 2013.
A.K.Rout, M.K.Parida, S.K.Nayak and S.Das, "Performance testing of Non-edible oil on four-stroke diesel engine by using low cost additives", Proceedings of International Congress on Renewable Energy" (ICORE 2013) 27-29 Nov 2013, KIIT University, Bhubaneswar, Odisha. Page 177-180
H. Joardar, G. Sutradhar, S. Singh, "An Investigation on the Effects of Silicon Carbide Reinforcement on Mechanical Properties and Machinibility of Cast LM6/SiC Particulate Composites", 1st International Symposiums, KIIT University, Bhubaneswar, 11th- 12th January, 2013.
H. Joardar, G. Sutradhar, N.S.Das, S. Singh, "Barreling of solid composite (LM6/SiCp) cylinders under uniaxial compressive load", International Journal of Applied Sciences and Engineering Research, Vol. 2, Issue 4, 2013, pp. 435-445.
M. Sahoo, R. N. Pramanik, D. R. Patra, "Experimental Investigation of Machining of Tungsten carbide by EDM and Its Mathematical Expression", International Journal of Mechanical and Production Engineering (IJMPE) ISSN No.: 2315-4489, Vol-2, Iss-1, 2013.
Lakshmi DVN, R.Das "Metal hydride sorption systems for automotive cooling." 1st KIIT International Symposium on Advances in Automobile Technology-2013, KIIT, BBSR.
Lakshmi DVN, R.Das, "Metal forming process in automobile industry", 1st KIIT International Symposium on Advances in Automobile Technology-2013, KIIT, BBSR
R.Das, Lakshmi DVN, "Finite simulation of multi hole extrusion", World Congress of Frontiers of Mechanical, Aeronautical & Automobile Engineering IIT Delhi-2013.
S.S.Mohapatra, Lakshmi DVN, P Mahanta, "Performance Evaluation of Natural Convection Dryer in Presence of Thermal Energy Storage Materials", 4th Nirma University International Conference on Engineering (Nuicone-2013), Nirma university, Ahemadabad , Gujarat.
S.S.Mohapatra, Lakshmi DVN, P Mahanta, "Performance Evaluation of Natural Convection Dryer using Phase Change Materials for Quality of Drying of Paddy", International Journal of Agriculture and Food Science Technology, Vol.4, pp.526-530, 2013.
Lakshmi DVN, T.R.Mishra, R.Das "Effects of Brown Gas Performance and Emission in a SI engine", International Journal of Scientific and Engineering research, Vol-4 (12),pp. 170-173 ,2013.
T. Bera, P. Mishra, D.Mishra, "Study of the mechanical properties of carbon black Epoxy composite", Emerging New Materials in Engineering Applications ENMEA,,Jan 19th -20th ,2013,VSSUT Burla.
I.S.Rout, A. Gaikwad, V.K.Verma, Mohd. Tariq, "Thermal Analysis of Steam Turbine Power Plants", International Organization of Scientific Research-Journal of Mechanical and Civil Engineering, e-ISSN: 2278-1684, p-ISSN: 2320-334X, May-June 2013, Vol 7 Issue 2, PP 28-36.
V.K.Verma, I.S.Rout, A.K.Rai, A.Gaikwad, "Optimization of Parameters Affecting the Performance of Passive Solar System using Taguchi Method", International Organization of Scientific Research-Journal of Mechanical and Civil Engineering, e-ISSN: 2278-1684, p-ISSN: 2320-334X, May-June 2013, Vol 7 Issue 2, PP 37-42.
P. Sinha, Mohd.Kaleen, I.S.Rout, Raisul Islam, "Analysis and Modeling of Thermal Mechanical Fatigue Crack Propagation of Turbine Blade Structure", International Journal of Mechanical Engineering and Technology, ISSN 0976- 6340 (Print), ISSN 0976 - 6359 (Online), May-June 2013, Vol 4 Issue 3, PP 155-176.
Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "Dynamic Simulation of Modified Claude Cycle", Proceedings of the 24th National Symposium on Cryogenics, January 22-24, 2013., IPR, Ahmedabad, India.
Rout, S. K., Gupta, A. K.,Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "Influence of Porosity on the Performance of a Pulse Tube Refrigerator: A CFD Study", Procedia Engineering, 51(0) (2013) 609-616.

Research Publications 2012

Chaterjee, S. and Pohit, G., 2012, Squeeze-film damping characteristics of cantilever microresonators under large electrostatic loading, Journal of Mechanics of Advanced Materials and Structures 19, 613-624, Taylor & Francis.
Chaterjee, S. and Pohit, G., 2012, Simulation studies on superharmonic resonances in electrostatically actuated microstructures, Proceedings of the International Conference on Microactuators and Micromechanisms, CSIR-CMERI, Durgapur, India, MAMM2012.
G.V. Krishna, A. Mohan Rao, T.Laxmi, Sunita Routray & R.Bhima Rao, "Effect of Different Designs of Spiral Concentrator on Recovery of Total Heavy Minerals from Red Sediments of Badlands Topography, Odisha, India", The Indian Mineral Industry Journal, ENTMS 2012, 9th-10th March ,pp. 109-115, Hotel Swosti Plaza, Bhubaneswar
G.V. Krishna, A. Mohan Rao, T.Laxmi, Sunita Routray & R.Bhima Rao, "Effect of Different Designs of Spiral Concentrator on Recovery of Total Heavy Minerals from Red Sediments of Badlands Topography, Odisha, India", The Indian Mineral Industry Journal, ENTMS 2012, 9th-10th March ,pp. 109-115, Hotel Swosti Plaza, Bhubaneswar
Sunita Routray and R. Bhima Rao, "Prospects for Setting Up Mineral Sand Industry along the Coastal Belt of Odisha- A Case Study on Development of Flowsheet", Seminar on Strategies for sustainable development in mining & allied industries, 2012, 25th May, pp.29-32, Hotel Mayfair, Puri
Sunita Routray and R. Bhima Rao, "Concentration Pattern of Heavy Minerals along the Konark-Ramachandi Coastal Stretch and its Recovery Process for Industrial Applications", Journal of Mining and Metallurgy, 48 A (1), pp. 1-11, 2012
Sunita Routray and R. Bhima Rao, "Magnetic Separation Tree Analysis for Recovery of Magnetic Minerals from Beach Sand", Turkish Journal of Science & Technology, Vol 7, No 1, 37-48, 2012
H.Joardar, N.S.Das, G.Sutradhar, "FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites", Journal of Minerals and Materials Characterization and Engineering, Vol 11, 2012, pp. 989-994.
Lakshmi DVN, Muthukumar P, "Thermodynamic Analysis of Thermally Operated Cascade Sorption Heat Pump for Continuous Cold Generation", International Journal and Environment, 2012; vol.4(1), PP. 161-174.
Rout, S. K., Mukare, R.,Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "CFD Simulation to Optimize Single Stage Pulse Tube Refrigerator Temperature Below 60K", Procedia Engineering, 2012. 38(0): p. 1524-1530.
Choudhury, B. K.,Alur, S. A., Sahoo, R. K., and Sarangi, S. K., "Optimization Analysis of Liquefaction Cycles for Nitrogen", Indian Journal of Cryogenics, volume 37No(1-4), pp 34, 2012.

Research Publications 2011

H. Jordar, N.S.Das, G. Sutradhar, "An experimental study of effect of process parameters in turning o Flm6 SICP metal matrix composite and its prediction using response surface methodology" International Journal of Engineering science and Technology Vol 2. No. 8. 2011 PP 132-141, 2011 multi craft.
S. Routray, T. Laxmi, R. Mohapatra and R. Bhima Rao," Textural and Concentration Pattern of Heavy Minerals in Beach and Dune Sands of Cyclone Prone Area along Northern Parts of Andhra Pradesh Coast, India", Journal of Mining and Metallurgy, 47 A (1),pp 15 – 37, 2011
Sunita Routray and R. Bhima Rao, "Beneficiation and Characterization of Detrital Zircons from Beach Sand and Red Sediments in India", Journal of Minerals & Materials Characterization & Engineering, Vol. 10 (15), pp. 1409-1428, 2011
A. K. Rout, K. P. Maity and M. K. Parida, "FEM Analysis of Extrusion of Triangular Sections from Round Billets through Curved Dies", Proceedings of the International Conference on Computational Methods in Manufacturing (ICCMM-2011), Indian Institute of Technology, Guwahati, December 15-16, 2011, India. (Presented)
A. K. Rout, K. P. Maity and M. K. Parida, "Sustainability of Green Energy for Developing Country", Proceedings of 26th Indian Engineering Congress (IEC 2011), The Institution of Engineers (India), Karnataka State Center, Bangalore, Dec. 15-18, 2011.
A. K. Rout, S. K. Nayak and M. K. Parida, "Design of SPV-Diesel Hybrid System for Remote Area", Proceedings of the National Conference on Renewable and New Energy Systems (RNES 2011), Synergy Institute of Engineering and Technology, Dhenkanal, Odisha, Dec. 22-23, 2011.
Alur, S. A.,Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "Performance Analysis of Plate Fin Heat Exchangers", Asian conference on Applied Super conductivity and Cryogenics November 16-18, 2011, I.U.A.C, .New Delhi.

Research Publications 2010

N.S.Das, B.C. Chawal, C.K. Biswas, "A simplified analysis and Experimental validation of chip breaking in orthogonal machining with a step type chip breaker" International Journal of Advances in machining and forming operations Vol 2. No. 2. PP 975-984, 2010 serial.
Chaterjee, S. and Pohit, G., 2010, Squeeze-film damping characteristics of cantilever microresonators for higher modes of flexural vibration, International Journal of Engineering Science and Technology 2(4), 187-199, Multicraft.
Chaterjee, S. and Pohit, G., 2010, Effect of large electrostatic load on squeeze-film characteristics for flexural modes of vibration of cantilever microresonators, Proceedings of the International Conference on Frontiers in Mechanical Engineering, NIT Surathkal, India, DA 308, 209-215.
Sunita Routray and R.Bhima Rao, "Value addition from Nalli hills of bad land topography of south orissa: an environmental awareness", 51st Annual technical session of Institute of Engineers, pp106-118,2010, Institute of Engineers, Bhubaneswar
Sunita Routray, R.Bhima Rao L.N,Padhi, B.Mishra, B.K.Panda, "Recovery of placer zircons from Konark–Ramchandi beach and dunes and its value addition for refractory industries", International seminar on Mineral Processing Technology -2010, NML Jamshedpur
Sunita Routray and R. Bhima Rao, "Value Addition from Nalli Hills of Badlands Topography of South Orissa, India", World of Metallurgy,-ERZMETALL 63, No.5, 2010
Chinmayee Satpathy, Sunita Routray, Danda Srinivas Rao, "Heavy Mineral Recovery from Beach and Dune sands of Ganjam Coast, Orissa, India" World of Metallurgy,-ERZMETALL 63 (2010) No.1
Sunita Routray, Chinmayee Satpathy, S.Angadi and R. Bhima Rao, "Opimisation of spiral concentrator to recover total heavy minerals from Konark-Ramachandi beach by statistical modeling", The Indian Mineralogist, ISSN 0019-5928, Vol. 44, No.1, pp. 227-235,2010
Alur, S. A.,Choudhury, B. K., Sahoo, R. K., and Sarangi, S. K., "Simulation of Turboexpander Based Nitrogen Liquefier", Proceedings of the 20th National and 9th International ISHMT-ASME Heat and Mass Transfer Conference, January 4-6, 2010, Mumbai, India.
Choudhury, B. K.,Alur, S. A., Sahoo, R. K., and Sarangi, S. K., "Design of High Expansion Ratio Turboexpander for Nitrogen Liquefier", Proceedings of the 3rd International Conference on Advances in Mechanical Engineering, January 4-6, 2010., S.V. National Institute of Technology, Surat, India.

Research Publications 2009

S.T. Dundur, N.S.Das, "Slipline field modeling of orthogonal machining for a worm tool with elastic effects and adhesion friction at the contact regions" Journal of Material processing Technology. Vol 209. PP 18-25, 2009 Elshivier.
Chaterjee, S. and Pohit, G., 2009, A large deflection model for the pull-in analysis of electrostatically actuated microcantilever beams, Journal of Sound and Vibration 322, 969-986, Elsevier.
Chaterjee, S. and Pohit, G., 2009, Nonlinear dynamics of electrostatically actuated microstructures under the effect of squeeze-film damping, Proceedings of the International Conference on Mechanical Engineering, BUET Dhaka, Bangladesh, ICME2009-RT-04.
Sunita Routray, Chinmayee Satapathy, D.S.Rao, B.K.Mohapatra, P.S.R. Reddy and R. Bhima Rao, "Beneficiation studies on recovery of zircon and its characterization: a case study on samples from beach and dunes of Konark-Ramachandi beach, Orissa", International seminar on Mineral Processing Technology -09, IMMT Bhubaneswar.
Chinmayee Satpathy, Sunita Routray, D.S. Rao and R.Bhima Rao, "Studies on recovery of total heavy magnetic minerals from Ramchandi and Rushikulya coasts of Orissa", International seminar on Mineral Processing Technology -09, IMMT Bhubaneswar.
Sunita Routray, C. Satpathy, S. Angadi and R. Bhima Rao, "Optimisation of spiral to recover total heavy minerals from Konark- Ramachandi beach by statistical modelling", Proceedings of National symposium on Advances in Atomic mineral science in India during the 50 year period:1959-2009, Hyderabad
Sunita Routray, D.S.Rao and R. Bhima Rao, "Preliminary Studies On Recovery Of Total Heavy Minerals From Konark –Ramchandi Beach", International Journal of Applied Engineering Research, ISSN 0973-4562, Vol. 4, No. 9, p 1715-1721,2009
B.Bhoi, Sunita Routray and A.K.Jouhari, "Smelting reduction of Chromite for manufacture of High Carbon Ferro-Chrome/Charge Chrome", Advances in the Theory of Iron making and Steelmaking, ATIS 2009, pp 101-108, Allied Publishers Pvt. Ltd, ISBN:978-81-8424-539-4.
B.C.Rourtray, D.R.Patra, "Parametric optimization of CNC wire cut EDM using Grey Relational Analysis", International Conference on Mechanical Engineering-2009[ICME09-RT-24].

Research Publications 2008

D.S.Rao, Sunita Routray, N.Vasumathi, B.K.Mohapatra, P.S.R.Reddy and R.Bhima Rao, "Characterisation Studies of Konark beach sand samples", 46th NMD/62nd ATM, 2008, pp 125, New Delhi
S.M.Ali, C. B.Misra, Sunita Routray, Ranjita Swain and R.Bhima Rao, "Energy from new uranium ore deposits of Orissa", All India Seminar On Advances Renewable Energy Technology, Bhubaneswar,20-21 September,2008, p 42-44, Edt IEI, Orissa State Center, Bhubaneswar.
Lakshmi DVN, Muthukumar P, "Thermodynamic Analysis of Metal Hydride Sorption System" IISC -Bangalore -2008.

Research Publications 2007

H. Joardar, G. Sutradhar, " A recent study on chip control", National seminar on Advances in Manufacturing Technology of Metals & Alloys (AMTMA-2007) on 13th January, 2007.

Research Publications 2005

Chatterjee, S., Chaterjee, S. and Singha, T.K., 2005, On the generation of steady motion using fast-vibration, Journal of Sound and Vibration 283(3-5), 1187-1204, Elsevier.
B.B.Jha, Sunita Routray and V.N. Misra, "Prospects of Power Sector Refurbishments in Orissa – Challenges and Opportunities", Steel & Metallurgy, Vol-7, No-5, pp. 35 – 40, 2005
B.B.Jha, Sunita Routray and V.N. Misra, "Prospects for growth of Sponge Iron Industry in Orissa,", Steel & Metallurgy, Vol-7, No-10, p 34 – 40,2005

Research Publications 2004

A.Satapathy, S.C.Mishra, M.Sahoo, "Numerical Prediction of Deposition Efficiency in Atmospheric Plasma Spray Coatings", 19th National Symposium on Plasma Science and Technology, PLASMA- 2004, December 7th – 10th, 2004, Jhansi.
A.Satapathy, S.C.Mishra, M.Sahoo, "Prediction of Interface Bond Strength of Plasma Spray Coatings Using Neural Network", 19th National Symposium on Plasma Science and Technology, PLASMA- 2004, December 7th – 10th, 2004, Jhansi.
A.Satapathy, M.Sahoo, "Development of Polymer Matrix Composite Using Fly Ash as Filler", 49th Congress of Indian Society of Theoretical and Applied Mechanics, December 27th – 30th, 2004, N.I.T. Rourkela.

Mechanical Engineering Department